Spring Brakes - ONLINE CDL SCHOOL

Practice free. No account needed.
Want your scores, test history, and progress in your driver dashboard? Create a free account or log in before starting to save your results.

Spring Brakes

Build confidence with 10 original questions about Spring Brakes. Review your answers and explanations after finishing.

Supplemental study practice. This is not a government licensing exam or ELDT certification, and does not replace hands-on training. Follow your state’s current handbook.

1 / 10

On some vehicles, what feature allows you to release spring brakes temporarily if main air pressure is lost?

An emergency foot pedal

A separate air tank with a dual parking control valve

A secondary compressor switch

A manual override switch on the dashboard

2 / 10

At what air pressure range do spring brakes typically fully engage on most tractors and straight trucks?

80 to 100 psi

100 to 120 psi

20 to 45 psi

55 to 70 psi

3 / 10

What happens if you lose all air pressure in the air brake system while driving a truck equipped with spring brakes?

Only the front brakes will apply automatically.

The spring brakes will automatically apply to stop the vehicle.

The parking brake control knob will pop out, but the brakes will not apply.

The brakes will remain released and you can continue driving.

4 / 10

What is a potential risk when using spring brakes to stop a lightly loaded vehicle or one on slippery roads?

The brakes will not apply at all.

The air compressor may overheat.

The parking brake knob may get stuck.

The vehicle may skid out of control when the spring brakes apply.

5 / 10

How does the braking power of spring brakes depend on brake adjustment?

Spring brakes will automatically adjust themselves.

Spring brakes always provide full power regardless of adjustment.

Adjustment only affects the service brakes, not spring brakes.

If brakes are out of adjustment, spring brakes will not work properly.

6 / 10

What is the function of the yellow, diamond-shaped control knob in newer vehicles with air brakes?

It adjusts the brake shoe clearance.

It controls the air compressor governor.

It activates the antilock braking system.

It applies and releases the parking (spring) brakes.

7 / 10

Why is it unsafe to wait for spring brakes to apply automatically when air pressure is low?

It will overheat the brake drums.

You may lose control of the vehicle if the brakes apply suddenly.

The brakes will not apply at all if you wait.

It will cause the air compressor to fail.

8 / 10

What should you do if the low air pressure warning activates while you are driving?

Continue driving until the spring brakes apply automatically.

Switch to a higher gear and keep driving.

Stop and park the vehicle safely as soon as possible.

Increase engine speed to build air pressure.

9 / 10

If your vehicle is equipped with a modulating control valve for spring brakes, how should you use it to park the vehicle?

Push the lever in quickly and release.

Move the lever as far as it will go and lock it in place.

Leave the lever in the neutral position.

Pump the lever several times to apply the brakes.

10 / 10

Why should you avoid pressing the brake pedal when the spring brakes are applied?

It will drain the air tanks too quickly.

It can damage the brakes due to combined spring and air pressure forces.

It will release the spring brakes unexpectedly.

It will cause the air compressor to overheat.

Your score is

The average score is 0%

About the Spring Brakes practice quiz

This practice quiz focuses on Spring Brakes, listed under CDL Practice — Air Brakes. Use it to check what you understand, spot topics to revisit, and connect the material to safe, informed decisions on the road.

Before you begin

Keep your current CDL manual or course notes nearby. Read each prompt carefully and think through why an answer fits, especially when a question describes a vehicle, road, or workplace situation. Licensing rules and procedures can vary, so confirm requirements with current official materials for your state.

After you finish

Review any explanations shown with your results. Note unfamiliar terms or missed concepts, then revisit your manual or course notes before trying again. Use your score to guide study; understanding why an answer is correct matters more than the number alone.

Study note: These quizzes are independent study practice. They are not state licensing exams, official government materials, or ELDT certification, and they do not replace required training.

Explore CDL Tests to find more practice by subject.