Leaks and Emergency Equipment - ONLINE CDL SCHOOL

Practice free. No account needed.
Want your scores, test history, and progress in your driver dashboard? Create a free account or log in before starting to save your results.

Leaks and Emergency Equipment

Build confidence with 10 original questions about Leaks and Emergency Equipment. Review your answers and explanations after finishing.

Supplemental study practice. This is not a government licensing exam or ELDT certification, and does not replace hands-on training. Follow your state’s current handbook.

1 / 10

During your pre-trip inspection, you notice the manhole cover on your tank vehicle does not close tightly. What should you do before loading?

Do not load the tank until the cover is properly sealed

Load the tank and monitor for leaks during transit

Ignore the issue if the cover is only slightly loose

Tighten the cover after loading the liquid

2 / 10

While inspecting your tank vehicle, you see a small dent on the tank’s body. What is the correct action?

Fill the tank only halfway to reduce pressure

Check for leaks and do not carry liquids if any are found

Ignore the dent if there is no visible leak

Patch the dent with tape before loading

3 / 10

You are inspecting the hoses and connections on your tank vehicle. What should you look for?

Ensure hoses are the correct color

Check for leaks, especially around joints

Tighten all connections with maximum force

Replace hoses after every trip

4 / 10

You are preparing to load a tank vehicle. What should you check about the intake, discharge, and cut-off valves?

Leave all valves open for ventilation

Check valves only after loading is complete

Close only the intake valve during loading

Ensure all valves are in the correct position before loading

5 / 10

Your tank vehicle is equipped with grounding and bonding cables. What is your responsibility before loading or unloading?

Use them only if the weather is rainy

Make sure grounding and bonding cables are present and working

Test them by dragging on the ground

Disconnect them before starting the engine

6 / 10

You are about to load a tank vehicle with a liquid that expands significantly in warm temperatures. What must you do?

Fill the tank completely to avoid air pockets

Reduce the speed during transit

Leave enough space in the tank for expansion (outage)

Add ice to keep the liquid cool

7 / 10

You are about to drive a tank vehicle and notice the vent on a manhole cover is blocked. What should you do?

Drive carefully and report the issue after delivery

Ignore the vent if the tank is not full

Cover the vent to prevent spills

Clear the vent so it works correctly before driving

8 / 10

If your tank vehicle has a built-in fire extinguisher, what must you do before driving?

Store it in a locked compartment

Test it by discharging a small amount

Check it only if you are carrying hazardous materials

Verify that the fire extinguisher is present and works

9 / 10

You are inspecting your tank vehicle before a trip. What should you do if you find a vapor recovery kit installed?

Verify that the vapor recovery kit is working properly

Ignore it if the tank is empty

Test it only after loading

Remove it unless carrying hazardous materials

10 / 10

You are about to drive a tank vehicle equipped with an emergency shut-off system. What should you do before starting your trip?

Leave the system off until an emergency occurs

Test the system only after loading the cargo

Assume it works if the indicator light is on

Check that the emergency shut-off system works properly

Your score is

The average score is 0%

About the Leaks and Emergency Equipment practice quiz

This practice quiz focuses on Leaks and Emergency Equipment, listed under CDL Practice — Tank Vehicles. Use it to check what you understand, spot topics to revisit, and connect the material to safe, informed decisions on the road.

Before you begin

Keep your current CDL manual or course notes nearby. Read each prompt carefully and think through why an answer fits, especially when a question describes a vehicle, road, or workplace situation. Licensing rules and procedures can vary, so confirm requirements with current official materials for your state.

After you finish

Review any explanations shown with your results. Note unfamiliar terms or missed concepts, then revisit your manual or course notes before trying again. Use your score to guide study; understanding why an answer is correct matters more than the number alone.

Study note: These quizzes are independent study practice. They are not state licensing exams, official government materials, or ELDT certification, and they do not replace required training.

Explore CDL Tests to find more practice by subject.