Cargo Securement: Comparing Reasonable Options

Practice free. No account needed.
Want your scores, test history, and progress in your driver dashboard? Create a free account or log in before starting to save your results.

Build confidence with 10 original questions about Cargo Securement: Comparing Reasonable Options. Review your answers and explanations after finishing.

Supplemental study practice. This is not a government licensing exam or ELDT certification, and does not replace hands-on training. Follow your state’s current handbook.

1 / 10

While inspecting a flatbed trailer before departure, you notice that a tiedown passes over the sharp edge of a metal crate. What action should you take to ensure the tiedown is not damaged during transit?

Use edge protection that resists abrasion and cutting

Ignore the sharp edge if the tiedown is new

Add extra tiedowns

Replace the tiedown with a chain

2 / 10

A driver is transporting a load of sand in a tank trailer that is part of the vehicle’s structure. Which cargo securement rules apply to this load?

Minimum two tiedowns are required

Commodity-specific rules for sand apply

General cargo securement rules apply

No federal cargo securement tiedown rules apply

3 / 10

A driver is transporting a large boulder weighing 12,000 lbs on an open vehicle with low sides. Which securement rules must be followed?

No securement rules apply

General cargo securement rules

Rules for metal coils

Commodity-specific rules for large boulders

4 / 10

A driver is planning to use a tiedown that has no markings indicating its strength. How should the working load limit be determined?

Use the highest possible rating

Use the lowest rating for that type of tiedown

Assume it is not allowed for use

Estimate based on appearance

5 / 10

You are preparing to secure a group of pipes on a flatbed trailer. The pipes are likely to roll during transit. What is the correct way to prevent rolling?

Use chocks, wedges, or a cradle

Use only transverse tiedowns

Place pipes in direct contact only

Rely on friction between pipes

6 / 10

You are transporting a load of dressed lumber that is bundled and unitized. Which securement rules apply to this load?

Rules for metal coils

General cargo securement rules

Commodity-specific rules for dressed lumber

No securement rules apply

7 / 10

A co-worker wants to use a tiedown that passes over the rub rail on a trailer equipped with rub rails. What guidance should you provide?

Rub rails are only for decorative purposes

It is prohibited to use tiedowns on trailers with rub rails

Tiedowns should be located inboard of the rub rails whenever practicable

Tiedowns must always pass over the rub rails

8 / 10

A driver is transporting a shipment of metal coils, each weighing 6,000 lbs. Which securement rules must be followed?

Rules for dressed lumber

No securement rules apply

General cargo securement rules

Commodity-specific rules for metal coils

9 / 10

A driver is using a welded steel chain for cargo securement, but the chain has no grade marking. How should the working load limit for this chain be determined?

Assign the highest possible chain grade

Do not use the chain at all

Assign the working load limit of grade 30 proof coil

Estimate based on chain thickness

10 / 10

You are transporting two large crates side by side, secured by a single transverse tiedown. What must you do to prevent them from shifting toward each other?

Place the crates in direct contact or prevent shifting between them

Use only blocking at the front

No additional action is needed

Add a tiedown over each crate

Your score is

The average score is 0%

About the Cargo Securement: Comparing Reasonable Options practice quiz

This practice quiz focuses on Cargo Securement: Comparing Reasonable Options, listed under CDL Practice — Cargo Securement. Use it to check what you understand, spot topics to revisit, and connect the material to safe, informed decisions on the road.

Before you begin

Keep your current CDL manual or course notes nearby. Read each prompt carefully and think through why an answer fits, especially when a question describes a vehicle, road, or workplace situation. Licensing rules and procedures can vary, so confirm requirements with current official materials for your state.

After you finish

Review any explanations shown with your results. Note unfamiliar terms or missed concepts, then revisit your manual or course notes before trying again. Use your score to guide study; understanding why an answer is correct matters more than the number alone.

Study note: These quizzes are independent study practice. They are not state licensing exams, official government materials, or ELDT certification, and they do not replace required training.

Explore CDL Tests to find more practice by subject.