Braking Systems

This test evaluates your understanding of truck braking systems, their components, and proper braking techniques to ensure safety on the road. A well-maintained and properly operated braking system is essential for preventing accidents, maintaining control, and complying with regulations.

Topics Covered:

Air brake system components and operation
Proper brake inspections and maintenance
Emergency braking procedures and response to brake failure
Best practices for descending steep grades safely
Understanding automatic braking systems and modern safety features

Passing this test demonstrates your ability to maintain and operate braking systems effectively, ensuring safe driving in all conditions.

Let me know if you’d like any refinements! 🚛⚙️

1 / 20

What component adjusts the brakes as they wear?

The slack adjuster

The air compressor

The brake pedal

The pressure regulator

2 / 20

What is the primary cause of brake fade?

Overuse of the brake pedal

Insufficient air pressure

Leakage in the brake lines

Excessive heat from prolonged braking

3 / 20

When checking air brake system hoses, what is a sign of potential failure?

Brightly colored hoses

Hoses with a soft, spongy feel

Metal fittings on the hoses

All of the above

4 / 20

What is the function of the ABS in an air brake system?

To increase braking power

To prevent wheel lockup

To store additional air pressure

To cool down the brakes

5 / 20

Which part of an air brake system reduces the pressure from the compressor to a usable level?

The brake pedal

The pressure gauge

The relay valve

The pressure regulator

6 / 20

Why is it important to drain moisture from air brake system reservoirs?

To prevent air line freezing

To increase fuel efficiency

To decrease brake noise

To improve engine performance

7 / 20

In air brake systems, what ensures the brakes engage if the system loses pressure?

Spring-loaded brakes

Hydraulic back-up

Manual brake lever

Emergency brake reservoir

8 / 20

What common symptom could indicate a problem with your vehicle’s brakes?

Increased fuel efficiency

A squealing noise when braking

Faster acceleration

Decreased engine performance

9 / 20

What safety device prevents air loss in one part of the system from affecting the brakes on other wheels?

The air compressor

Pressure relief valves

Dual air brake systems

Anti-lock braking system (ABS)

10 / 20

How often should brake inspections be conducted for optimal safety?

Once a year

Every 10,000 miles

Before every use

Every 50,000 miles

11 / 20

Which component stores air pressure for the brakes to use in an air brake system?

The compressor

The reservoir tanks

The brake pedal

The brake lines

12 / 20

What should you do first if you experience a brake failure while driving?

Pump the brakes rapidly

Shift to a lower gear

Apply the parking brake gently

Turn off the engine

13 / 20

During a brake inspection, what indicates that the brake pads need to be replaced?

The brake fluid is clear and at the correct level

The brake pads are less than 1/4 inch thick

The air compressor cycles on and off frequently

The ABS light is on

14 / 20

What is the first step in a proper brake inspection?

Checking the brake fluid level

Inspecting the brake lines for leaks

Measuring the thickness of the brake pads

Listening for any unusual noises

15 / 20

What principle do air brake systems use to function?

Hydraulic pressure

Electrical resistance

Pneumatic pressure

Mechanical leverage

16 / 20

What is the key factor in maintaining vehicle control under heavy braking?

Braking early and gradually

Using only the front brakes

Turning off ABS

Pumping the brakes quickly

17 / 20

Which of the following will be true about your brake function if your anti-lock braking system (ABS) fails?

It may cause problems with other mechanical systems and possibly pose a huge fire risk.

It will slow your truck to a halt and force you to pull over.

You will still have normal brake function and will just need to get the ABS repaired soon.

You will have no brake function and your truck will be out of control.

18 / 20

What is the first step of proper braking technique when you’re going down a steep downgrade?

Accelerate.

Release the brakes.

Release the clutch.

Downshift.

19 / 20

An anti-lock braking system (ABS) will

keep your wheels from locking when you brake hard.

let you drive faster.

increase your vehicle's stopping power.

increase your stopping distance.

20 / 20

How can you determine if your vehicle is equipped with an anti-lock braking system (ABS)?

Check for a yellow ABS malfunction lamp on the instrument panel.

Look for wheel speed sensor wires that are coming from the rear of your brakes.

Check if your vehicle was manufactured after March 1, 1998. (Such vehicles are required to have the panel light.)

All of the above can work.

Your score is

The average score is 28%