Emergency Equipment Inspection

Practice free. No account needed.
Want your scores, test history, and progress in your driver dashboard? Create a free account or log in before starting to save your results.

Build confidence with 10 original questions about Emergency Equipment Inspection. Review your answers and explanations after finishing.

Supplemental study practice. This is not a government licensing exam or ELDT certification, and does not replace hands-on training. Follow your state’s current handbook.

1 / 10

During your pre-trip inspection, you notice the fire extinguisher is present but not secured in its bracket. What should you do before driving?

Place the fire extinguisher on the passenger seat

Secure the fire extinguisher properly in its bracket

Ignore it if the extinguisher is charged

Remove the fire extinguisher from the vehicle

2 / 10

You are inspecting your emergency equipment and see that you have three reflective triangles and no flares. What should you do?

Continue, as three triangles meet requirements

Replace triangles with liquid burning flares

Add six fusee flares before driving

Remove the triangles and use only flares

3 / 10

When inspecting emergency exits on a school bus, what must you demonstrate to the examiner?

That all exits are painted red

That only the rear exit works

That at least one emergency exit operates smoothly and closes securely

That the exits are locked at all times

4 / 10

You are performing an air brake check and the low air warning buzzer activates at 60 psi. What should you conclude?

The warning device is activating too late and must be repaired

The warning device is working properly

The air pressure is too high

The brakes need to be adjusted

5 / 10

While inspecting the passenger mirrors on your bus, you find one is dirty and difficult to see through. What is the correct action?

Cover the dirty mirror

Clean the mirror so it is clear and provides a proper view

Ignore it if the other mirrors are clean

Adjust the seat instead

6 / 10

You are inspecting the lights on your vehicle. What is the purpose of checking both the operation and condition of headlights, turn signals, and brake lights?

To make the vehicle look attractive

To ensure you can see and be seen and communicate with other traffic

To save battery power

To reduce engine wear

7 / 10

You are inspecting the windshield before your trip. What condition would require you to correct the issue before driving?

A small inspection sticker in the corner

A crack in the driver’s viewing area

A windshield with minor dust

A clean windshield with no damage

8 / 10

During your pre-trip, you check the entry steps of your passenger bus and find loose tread. What should you do?

Repair or secure the tread before operating

Cover the loose tread with a mat

Ask passengers to use a different door

Ignore it if passengers can still step safely

9 / 10

While checking the dashboard indicators during your inspection, you notice the ABS light stays on after starting the engine. What does this mean?

The ABS system is working correctly

The ABS system is not working properly

The engine needs to warm up more

The indicator always stays on

10 / 10

During your pre-trip, you check the emergency first aid kit on your school bus and see the seal is broken. What should you do?

Remove the kit from the bus

Ignore the broken seal if the kit is present

Seal the kit with tape

Inspect the kit for missing items and replace as needed

Your score is

The average score is 0%

About the Emergency Equipment Inspection practice quiz

This practice quiz focuses on Emergency Equipment Inspection, listed under CDL Practice — Pre-Trip Inspection. Use it to check what you understand, spot topics to revisit, and connect the material to safe, informed decisions on the road.

Before you begin

Keep your current CDL manual or course notes nearby. Read each prompt carefully and think through why an answer fits, especially when a question describes a vehicle, road, or workplace situation. Licensing rules and procedures can vary, so confirm requirements with current official materials for your state.

After you finish

Review any explanations shown with your results. Note unfamiliar terms or missed concepts, then revisit your manual or course notes before trying again. Use your score to guide study; understanding why an answer is correct matters more than the number alone.

Study note: These quizzes are independent study practice. They are not state licensing exams, official government materials, or ELDT certification, and they do not replace required training.

Explore CDL Tests to find more practice by subject.