Equipment and Maintenance: Suspension, Springs, and Shock Absorber Scenario Decisions

Practice free. No account needed.
Want your scores, test history, and progress in your driver dashboard? Create a free account or log in before starting to save your results.

Build confidence with 10 original questions about Equipment and Maintenance: Suspension, Springs, and Shock Absorber Scenario Decisions. Review your answers and explanations after finishing.

Supplemental study practice. This is not a government licensing exam or ELDT certification, and does not replace hands-on training. Follow your state’s current handbook.

1 / 10

You are inspecting an air suspension system and hear a hissing sound near the air ride components. What is the safest next step?

Add air to the system and check again.

Do not drive until the air leak is repaired.

Reduce your speed and continue to your destination.

Continue driving and monitor the air pressure gauge.

2 / 10

During your walkaround, you see a leaking shock absorber on the left front suspension. What is the correct action?

Ignore the leak if the ride feels normal.

Drive at a reduced speed until repairs can be made.

Wipe off the leak and continue driving.

Have the shock absorber repaired before operating the vehicle.

3 / 10

While inspecting a multi-leaf spring, you notice some leaves have shifted and might hit a tire. What should you do?

Continue driving and check again at your next stop.

Secure the leaves with a tie and proceed.

Do not operate the vehicle until the defect is fixed.

Drive slowly and avoid sharp turns.

4 / 10

While inspecting the suspension system, you find that one-fourth of the leaves in a leaf spring are missing. What should you do?

Drive carefully to the nearest repair shop.

Do not drive the vehicle; it is out of service.

Replace only the missing leaves and continue.

Continue driving if the vehicle feels stable.

5 / 10

During your walkaround, you check the condition of the spring, spring hangers, shackles, and u-bolts on the left front suspension. What are you looking for?

If the parts are the same color as the frame.

Only if the parts are painted.

Any signs of damage, looseness, or missing parts.

If the parts are new or old.

6 / 10

While inspecting the rear suspension, you notice the bushings on a torque rod arm are worn out. What is the correct action?

Drive only on smooth roads until repairs can be made.

Apply lubricant to the bushings and proceed.

Continue driving and check again at your next stop.

Replace the worn bushings before operating the vehicle.

7 / 10

You notice a cracked spring hanger during your pre-trip inspection. What should you do before operating the vehicle?

Monitor the crack and check it at your next stop.

Drive at a reduced speed to the repair shop.

Continue driving and report the defect at the end of your shift.

Have the spring hanger repaired or replaced before driving.

8 / 10

During your inspection, you find a cracked torque rod on the rear suspension. What should you do?

Have the torque rod replaced before driving.

Drive only on smooth roads.

Continue driving if the crack is small.

Apply grease to the crack and proceed.

9 / 10

During your pre-trip inspection, you notice a spring hanger that allows the axle to move from its proper position. What is the safest next step?

Do not operate the vehicle until the defect is repaired.

Continue driving and report the issue at the end of your shift.

Reduce your speed and monitor the situation.

Tighten the spring hanger bolts and continue.

10 / 10

While inspecting the left front suspension, you notice a loose u-bolt. What is the correct action?

Do not drive until the u-bolt is tightened or replaced.

Drive slowly and avoid bumps.

Tighten the u-bolt by hand and proceed.

Continue driving and check again at your next stop.

Your score is

The average score is 0%

About the Equipment and Maintenance: Suspension, Springs, and Shock Absorber Scenario Decisions practice quiz

This practice quiz focuses on Equipment and Maintenance: Suspension, Springs, and Shock Absorber Scenario Decisions, listed under CDL Practice — Equipment and Maintenance. Use it to check what you understand, spot topics to revisit, and connect the material to safe, informed decisions on the road.

Before you begin

Keep your current CDL manual or course notes nearby. Read each prompt carefully and think through why an answer fits, especially when a question describes a vehicle, road, or workplace situation. Licensing rules and procedures can vary, so confirm requirements with current official materials for your state.

After you finish

Review any explanations shown with your results. Note unfamiliar terms or missed concepts, then revisit your manual or course notes before trying again. Use your score to guide study; understanding why an answer is correct matters more than the number alone.

Study note: These quizzes are independent study practice. They are not state licensing exams, official government materials, or ELDT certification, and they do not replace required training.

Explore CDL Tests to find more practice by subject.