Load Securement: Federal Cargo Securement Rules and Applications

Practice free. No account needed.
Want your scores, test history, and progress in your driver dashboard? Create a free account or log in before starting to save your results.

Build confidence with 10 original questions about Load Securement: Federal Cargo Securement Rules and Applications. Review your answers and explanations after finishing.

Supplemental study practice. This is not a government licensing exam or ELDT certification, and does not replace hands-on training. Follow your state’s current handbook.

1 / 10

A driver is preparing to use an unmarked welded steel chain as a tiedown. How should its working load limit (WLL) be determined for compliance?

Estimate based on its thickness

Assume it meets the highest grade available

Use the WLL for synthetic webbing

Treat it as grade 30 proof coil chain

2 / 10

When planning to secure cargo, what is the minimum aggregate working load limit required for the securement system?

One-quarter the weight of the cargo

Twice the weight of the cargo

At least one-half the weight of the article or group of articles

Equal to the total weight of the cargo

3 / 10

You are preparing to secure a load of sand in a tank that is part of the vehicle structure. Which securement rules apply?

Only the minimum tiedown rule applies

Commodity-specific rules for sand must be used

The cargo securement rules do not apply to this bulk commodity

General cargo securement rules must be followed

4 / 10

You are loading several articles side by side and securing them with transverse tiedowns. What must you ensure about their placement?

Each article is secured with a separate tiedown

They are in direct contact or prevented from shifting toward each other

They are spaced at least 6 inches apart

They are stacked on top of each other

5 / 10

A driver is planning to use dunnage bags to secure cargo. What is the intended function of these bags?

To fill space between articles or between cargo and the vehicle wall

To support the cargo from underneath

To absorb moisture from the cargo

To provide extra tiedown strength

6 / 10

When planning to transport a load of logs that are unitized by banding, which securement rules apply?

Special rules for oversized loads

General cargo securement rules

No securement rules are required

Commodity-specific rules for logs

7 / 10

A driver is preparing to transport several steel pipes that could roll during transit. What is the correct way to prevent these pipes from rolling according to federal cargo securement rules?

Rely only on friction between the pipes and the trailer bed

Use chocks, wedges, or a cradle that cannot become loose during transit

Place them side by side without any restraint

Secure them with a single tiedown over the top

8 / 10

During load planning, you notice your trailer is equipped with rub rails. Where should you position tiedowns whenever possible?

Inboard of the rub rails

Attached to the outside of the rub rails

Under the trailer bed

Over the rub rails

9 / 10

You are preparing to transport a shipment of metal coils, each weighing 6,000 lbs. Which securement rules must you follow?

No securement rules are required

General cargo securement rules only

Commodity-specific rules for metal coils

Rules for intermodal containers

10 / 10

You are planning to use a tiedown that will be in contact with a sharp edge of your cargo. What must you do before securing the load?

Wrap the tiedown with tape

Use only steel chain tiedowns

Double the number of tiedowns

Add edge protection that resists abrasion and cutting

Your score is

The average score is 0%

About the Load Securement: Federal Cargo Securement Rules and Applications practice quiz

This practice quiz focuses on Load Securement: Federal Cargo Securement Rules and Applications, listed under CDL Practice — Load Securement. Use it to check what you understand, spot topics to revisit, and connect the material to safe, informed decisions on the road.

Before you begin

Keep your current CDL manual or course notes nearby. Read each prompt carefully and think through why an answer fits, especially when a question describes a vehicle, road, or workplace situation. Licensing rules and procedures can vary, so confirm requirements with current official materials for your state.

After you finish

Review any explanations shown with your results. Note unfamiliar terms or missed concepts, then revisit your manual or course notes before trying again. Use your score to guide study; understanding why an answer is correct matters more than the number alone.

Study note: These quizzes are independent study practice. They are not state licensing exams, official government materials, or ELDT certification, and they do not replace required training.

Explore CDL Tests to find more practice by subject.