Vehicle Inspections: Comparing Vehicle Inspection Decisions and Procedures

Practice free. No account needed.
Want your scores, test history, and progress in your driver dashboard? Create a free account or log in before starting to save your results.

Build confidence with 10 original questions about Vehicle Inspections: Comparing Vehicle Inspection Decisions and Procedures. Review your answers and explanations after finishing.

Supplemental study practice. This is not a government licensing exam or ELDT certification, and does not replace hands-on training. Follow your state’s current handbook.

1 / 10

During your inspection, you see fresh oil and coolant under the vehicle. What is the correct action?

Wipe up the fluids and continue the inspection

Ignore the fluids if the levels seem normal

Investigate for leaks and do not drive until repaired

Drive the vehicle to a repair shop before reporting the issue

2 / 10

You are about to exit the cab during your vehicle inspection. What is the safest way to do this?

Step down quickly facing away from the cab

Face the vehicle and maintain three points of contact

Jump down if you are in a hurry

Hold only one hand on the rail for balance

3 / 10

You are inspecting the steering system and find the steering wheel moves more than two inches at the rim of a 20-inch wheel. What does this indicate?

There is excessive play, making steering difficult and unsafe

The tires are underinflated

The steering wheel needs lubrication

The steering system is functioning normally

4 / 10

While inspecting the wheels, you notice rust around several wheel nuts. What should you do next?

Replace the wheel immediately

Ignore the rust if the wheel feels tight

Check the tightness of the nuts to ensure they are secure

Apply lubricant to the nuts

5 / 10

While performing your inspection, you notice a component on the vehicle is marked or labeled by someone other than the manufacturer. What should you do if this is for a vehicle inspection test?

Do not use the vehicle for the inspection test

Cover the markings with tape before the test

Ask the examiner to disregard the markings

Continue the test and ignore the markings

6 / 10

You are about to begin your vehicle inspection and notice the vehicle is leaning to one side. What should you do next?

Check for flat tires, suspension issues, or other visible damage before proceeding

Ignore it and continue with the inspection as usual

Start the engine to see if the problem corrects itself

Move the vehicle to a different location before inspecting further

7 / 10

If you do not understand the examiner’s instructions during the vehicle inspection test, what should you do?

Ask the examiner for clarification

Guess what the examiner wants

Skip the step and move on

Wait for the examiner to repeat the instructions

8 / 10

During your inspection, you find a leaf spring with more than one-fourth of its leaves missing. What is the correct action?

Tighten the u-bolts and re-inspect later

Add more cargo to balance the load

Continue driving if the remaining leaves look strong

Do not drive; the vehicle is out of service until repaired

9 / 10

When preparing to check the engine compartment, what must you do before raising the hood?

Release the air brakes

Set the parking brakes and/or chock the wheels

Turn on the headlights

Check the tire pressure

10 / 10

Why should you perform your vehicle inspection the same way each time?

To learn all the steps and avoid forgetting something

Because it is required by law

So the examiner can follow your process

To finish the inspection faster

Your score is

The average score is 0%

About the Vehicle Inspections: Comparing Vehicle Inspection Decisions and Procedures practice quiz

This practice quiz focuses on Vehicle Inspections: Comparing Vehicle Inspection Decisions and Procedures, listed under CDL Practice — Vehicle Inspections. Use it to check what you understand, spot topics to revisit, and connect the material to safe, informed decisions on the road.

Before you begin

Keep your current CDL manual or course notes nearby. Read each prompt carefully and think through why an answer fits, especially when a question describes a vehicle, road, or workplace situation. Licensing rules and procedures can vary, so confirm requirements with current official materials for your state.

After you finish

Review any explanations shown with your results. Note unfamiliar terms or missed concepts, then revisit your manual or course notes before trying again. Use your score to guide study; understanding why an answer is correct matters more than the number alone.

Study note: These quizzes are independent study practice. They are not state licensing exams, official government materials, or ELDT certification, and they do not replace required training.

Explore CDL Tests to find more practice by subject.